Carbide

 (21 product groups)

Need a Quote?

For large volumes and non-standard products, add to your cart and click request a quote. You may also call 800 253 0421 or email sales@reidsupply.com. We respond to most quotes within 4 working hours. (Business hours are Monday through Friday, 7:30 am to 6:00 pm ET)

Filter Products

List Grid

Cable Carrier Accessories - Vertical Separators

In stock Limited availability

We offer a selection of vertical separators that are compatible with our line of modular cable carrier systems.

{0} variants (Filters applied) {0} variants (No filters applied)

Combined Drills and Countersinks

In stock Limited availability

Combination drills and countersinks are short, double-ended drills used to produce a shallow conical or center hole, typically on the end of workpiece to be held between centers before turning in a lathe or cylindrical grinding.

{0} variants (Filters applied) {0} variants (No filters applied)

Countersinks

In stock Limited availability

Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down.

{0} variants (Filters applied) {0} variants (No filters applied)

Dial Micrometers

In stock Limited availability

Outside micrometers are used for measuring the thickness or outside diameter of small parts or fittings with high accuracy. Similar in appearance to a C-clamp, the object to be measured is clamped between the anvil (the stationary end of the clamp) and the spindle (the moving part of the clamp). The clamp opens and closes by turning an internal screw. On analog micrometers, measurement is calculated by reading the lines and numbering system that appears on the thimble and sleeve.

{0} variants (Filters applied) {0} variants (No filters applied)

Drill Bushings

In stock Limited availability

Drill bushings or drill guide are installed into a drilling jig to guide, support, and position a drill or other cutting tool during metalworking tasks. They keep the cutting tool from wandering or bending as it enters the workpiece.

{0} variants (Filters applied) {0} variants (No filters applied)

Drills

In stock Limited availability

ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to find drill bits for various metal, wood or plastic materials.

{0} variants (Filters applied) {0} variants (No filters applied)

End Mills

In stock Limited availability

Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more.

{0} variants (Filters applied) {0} variants (No filters applied)

Grippers

In stock Limited availability

Ideal for irregularly shaped workpieces, we offer an assortment of serrated gripper pads, as well as adjustable bolt grippers, swivel action grippers, and tapered grippers.

{0} variants (Filters applied) {0} variants (No filters applied)

Hole Saws and Accessories

In stock Limited availability

Hole saws are used for making large hold diameters because they can do the job quicker than standard drill bits. We offer an assortment of hole saws, as well as pilot drills and arbors.

{0} variants (Filters applied) {0} variants (No filters applied)

Indexable Drilling

In stock Limited availability

Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of a less expensive but tougher material. Plus, the removable inserts can be easily exchanged during production without affecting the overall geometry of the tool, thereby eliminating additional set-up changes. For drilling applications, we offer both indexable drills and indexable drill inserts.

{0} variants (Filters applied) {0} variants (No filters applied)

Indexable Grooving and Parting

In stock Limited availability

Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of a less expensive but tougher material. Plus, the removable inserts can be easily exchanged during production without affecting the overall geometry of the tool, thereby eliminating additional set-up changes. For grooving and parting applications, we offer grooving holders, grooving blades, integral shank toolholders, and parting inserts.

{0} variants (Filters applied) {0} variants (No filters applied)

Indexable Milling

In stock Limited availability

Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of a less expensive but tougher material. Plus, the removable inserts can be easily exchanged during production without affecting the overall geometry of the tool, thereby eliminating additional set-up changes. For milling applications, we offer indexable end mills and milling inserts.

{0} variants (Filters applied) {0} variants (No filters applied)

Indexable Threading

In stock Limited availability

Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of a less expensive but tougher material. Plus, the removable inserts can be easily exchanged during production without affecting the overall geometry of the tool, thereby eliminating additional set-up changes. For threading applications, we offer threading toolholders and threading inserts.

{0} variants (Filters applied) {0} variants (No filters applied)

Indexable Turning

In stock Limited availability

Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of a less expensive but tougher material. Plus, the removable inserts can be easily exchanged during production without affecting the overall geometry of the tool, thereby eliminating additional set-up changes. For turning applications, turning toolholders and turning inserts.

{0} variants (Filters applied) {0} variants (No filters applied)

Indicator Accessories

In stock Limited availability

We offer a selection of accessories for use with our line of dial and digital indicators. Products include contact points, connecting cable, magnetic stands, and swivel joints.

{0} variants (Filters applied) {0} variants (No filters applied)

Laps & Lap Sets

In stock Limited availability

Metalworking laps are part of an abrasive machining process that scrubs abrasive stones against your material along a controlled path to create a precision surface.

{0} variants (Filters applied) {0} variants (No filters applied)

Lathe Centers

In stock Limited availability

Lathe centers help position and support long workpieces on a lathe to prevent the loss of accuracy caused by deflection or bending. We supply both live and dead lathe centers.

{0} variants (Filters applied) {0} variants (No filters applied)

Reamers

In stock Limited availability

Chucking reamers are used to enlarge an existing hole to an exact size for a precise fit.

{0} variants (Filters applied) {0} variants (No filters applied)

Rotary Files

In stock Limited availability

Used for deburring, shaping, and smoothing, our carbide rotary files are available in a variety of head types, including standard cut, double cut, and aluminum cut.

{0} variants (Filters applied) {0} variants (No filters applied)

Tooling Balls & Accessories

In stock Limited availability

Tooling balls are used as a reference point for inspection, layout, and machining applications. We offer tooling balls with or without a shoulder.

{0} variants (Filters applied) {0} variants (No filters applied)

Tungsten Carbide

In stock Limited availability

Tungsten carbide balls are used where extreme hardness and wear resistance is required. Used for applications such as bearings, ball screws, valves, coining, pivots, detents, and tips for gauges and tracers. Can also be used for ballizing, gauging, and checking.

{0} variants (Filters applied) {0} variants (No filters applied)