Menu Search
Need a Quote?

For large volumes and non-standard products, add to your cart and click request a quote. You may also call 800 253 0421 or email sales@reidsupply.com. We respond to most quotes within 4 working hours. (Business hours are Monday through Friday, 7:30 am to 6:00 pm ET)

Clearance Raw Stock

 (8 product groups)

List Grid

Bronze Rods

In stock Backordered. Click here to request lead time.

Bronze is an alloy that consists primarily of copper with the addition of other ingredients. In most cases the ingredient added is typically tin, but arsenic, phosphorus, aluminum, manganese, and silicon is also be used to produce different properties in the material. All of these ingredients produce an alloy much harder than copper alone. Bronze is characterized by its dull-gold color, and has faint rings on its surface (which helps one to differentiate it from brass). Bronze bars are used in the construction of sculptures, musical instruments and medals, and in industrial applications such as bushings and bearings, where its low metal on metal friction is an advantage. Bronze also has nautical applications because of its resistance to corrosion. Other applications include bearings and bushings, pump impellers, valve components, wire brushes, chemical hardware, gears, and pipe fittings.

{0} variants (Filters applied) {0} variants (No filters applied)

Stainless Steel Key Stock

In stock Backordered. Click here to request lead time.

Keystock is used to transmit torque from a shaft to a specific component. Size is clearly marked on each bar.

{0} variants (Filters applied) {0} variants (No filters applied)

Drill Rods

In stock Backordered. Click here to request lead time.

All rods come in 36" lengths and are AISI/SAE. Available in the following types: O-1: Oil-hardening for general tool room use. Good nondeforming characteristics. Moderate resistance to abrasion. Machinability 90%. S-7: Air-hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. Machinability 95%. A-2: Air-hardening. Maximum abrasion resistance. Machinability 65%.W-1: Water hardening offers a combination of high abrasion resistance and toughness when hardened. Machinability 100%.D-2: Air hardening. Offers significantly better wear resistance and a high compressive strength. Machinability 65%.

{0} variants (Filters applied) {0} variants (No filters applied)

Tungsten Carbide

In stock Backordered. Click here to request lead time.

Tungsten carbide balls are used where extreme hardness and wear resistance is required. Used for applications such as bearings, ball screws, valves, coining, pivots, detents, and tips for gauges and tracers. Can also be used for ballizing, gauging, and checking.

{0} variants (Filters applied) {0} variants (No filters applied)

Urethane Bars

In stock Backordered. Click here to request lead time.

Made from K-prene® urethane. Rods and bars are available in 80A, 90A, and 95A durometer. All are 48" long. 80A is orange, 90A is blue and 95A is red. Length tolerance is ± 1/8". Diameter or width is ±2%.

{0} variants (Filters applied) {0} variants (No filters applied)

Steel Flat Stock

In stock Backordered. Click here to request lead time.

Made of dimensionally stable chromium, tungsten and vanadium electric furnace tool steel. Low 1,450-1,500 Fahrenheit hardening range makes this steel easy to harden. Vanadium content assures fine grain and high durability. Fully spheroidized and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness is .003″ per inch. Finish is 35 microinch or finer.

{0} variants (Filters applied) {0} variants (No filters applied)

Steel Key Stock

In stock Backordered. Click here to request lead time.

Keystock is used to transmit torque from a shaft to a specific component. Size is clearly marked on each bar.

{0} variants (Filters applied) {0} variants (No filters applied)

Urethane Rods

In stock Backordered. Click here to request lead time.

Made from K-prene® urethane. Rods and bars are available in 80A, 90A, and 95A durometer. All are 48" long. 80A is orange, 90A is blue and 95A is red. Length tolerance is ± 1/8". Diameter or width is ±2%.

{0} variants (Filters applied) {0} variants (No filters applied)