Telescoping Gage; Minimum Measurement=12.7 mm | 0.500 in, Maximum Measurement=152.4 mm | 6.000 in

The Starrett Telescoping Gage is used for determining the true size of holes, slots, and recesses up to 6" (150mm). The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. These tools must be slightly rocked� in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer. Set includes 5, Nos. 229A/B/C/D/E in Case.