Jig-Fixture Clamps & Accessories

 (16 products)

Need a Quote?

For large volumes and non-standard products, add to your cart and click request a quote. You may also call 800 253 0421 or email sales@reidsupply.com. We respond to most quotes within 4 working hours. (Business hours are Monday through Friday, 7:30 am to 6:00 pm ET)

We offer a complete line of jig and fixture clamps for machining and fixturing applications. Our compact fixture clamps allow you to fixture more parts on the machine table. Available in cam edge clamps, toe clamps, and wedge clamps, these economical, low-profile clamps make programming easier because there are no clamps to jump over. ID expansion clamps are excellent for palletized setups in secondary operations on lathe parts. Our hook clamp assemblies and swing clamp assemblies are idea for set-ups where space is limited. Machine strap clamps are used to secure large or oddly shaped workpieces directly to the table. Cam handles provide quick locking action and high holding pressure. Adjustable clamp rests are used to support and level a clamp on mills and other machining applications. Set-up wedges are used for leveling and to provide extra height to the workpiece or strap clamps. Triangular step blocks have long angled serrated edges that fit together so the top block is the same height as the workpiece to level a set-up clamp.

Filter Products

List Grid

Hex Cam Edge Clamps

In stock Limited availability

Hex Cam Edge Clamps lock positively at any position within its 180 degree turn to hold parts that vary slightly in dimensions. The clamp jaw pivots forward and downward simultaneously when the handle is turned to hold the work piece securely to the table.

{0} variants (Filters applied) {0} variants (No filters applied)

Knife Cam Edge Clamps

In stock Limited availability

Knife Cam Edge Clamps can be used for clamping rough cut stock, castings and any material that requires a hardened clamping element.

{0} variants (Filters applied) {0} variants (No filters applied)

Cam Handle Edge Clamps

In stock Limited availability

Cam Handle Edge Clamps lock positively at any position within its 180 degree turn to hold parts that vary slightly in dimensions. The clamp jaw pivots forward and downward simultaneously when the handle is turned to hold the work piece securely to the table.

{0} variants (Filters applied) {0} variants (No filters applied)

Edge & Toe Clamps

In stock Limited availability

Edge and Toe Clamps provide positive down force while using very little space on a fixture.

{0} variants (Filters applied) {0} variants (No filters applied)

Wedge Clamps

In stock Limited availability

Hardened and ground Wedge Clamps can product holding forces over 19,000 lbs. The cross-wedge construction allows the clamp to lock firmly in every direction as it is tightened down. Wedge Clamps are available with single or double wedge.

{0} variants (Filters applied) {0} variants (No filters applied)

ID Expansion Clamps

In stock Limited availability

ID Expansion Clamps are excellent for palletized setups in secondary operations on lathe parts. These clamps are made of mild steel for machinability to size on lathe or mill and allow more parts per work cube or fixture plate.

{0} variants (Filters applied) {0} variants (No filters applied)

Hook Clamp Assemblies

In stock Limited availability

Hook Clamp Assemblies are ideal for use on jig and fixture quick build systems to generate holding power in close quarters with direct downward clamping force. The hook clamp easily swings out of the way for unloading once released.

{0} variants (Filters applied) {0} variants (No filters applied)

Machine Strap Clamps

In stock Limited availability

Plain Grip Machine Strap Clamps reach over the work piece and hold it in place for maximum pressure. These clamps are available machined from solid bar stock or tempered steel with a varnished finish.

{0} variants (Filters applied) {0} variants (No filters applied)

Knob Machine Strap Clamp Assemblies

In stock Limited availability

Designed for light-duty clamping, the hand knob eliminates wrenching for faster work changes. Spherical washer allows for clamping irregular surfaces.

{0} variants (Filters applied) {0} variants (No filters applied)

Cam Machine Strap Clamp Assemblies

In stock Limited availability

Cam Machine Strap Clamp Assemblies have a spring loaded stud and cam lever for quick action and high holding pressure. Plain Grip Machine Strap Clamps reach over the work piece and hold it in place for maximum pressure. These clamps are available machined from solid bar stock or tempered steel with a varnished finish.

{0} variants (Filters applied) {0} variants (No filters applied)

Flange Nut Machine Strap Clamp Assemblies

In stock Limited availability

Flange Nut Machine Strap Clamp Asseblies have a spring loaded stud and cam lever for quick action and high holding pressure. These assemblies are ideal for holding plain surface work where quick movements are required in a restricted space.

{0} variants (Filters applied) {0} variants (No filters applied)

Cam Handles

In stock Limited availability

Cam Handles also called Cam Levers, are used for clamping force that can lock at any position within its 180 degree turn to hold parts that vary slightly in dimensions. The clamp jaw pivots forward and downward simultaneously when the handle is turned to hold the work piece securely to the table.

{0} variants (Filters applied) {0} variants (No filters applied)

Clamp Supports

In stock Limited availability

Protect your set-up clamps with these supports. Includes washer, spring and shaft collar. Black oxide finish on washer. Choose from various diameters.

{0} variants (Filters applied) {0} variants (No filters applied)

Adjustable Clamp Rests

In stock Limited availability

Available in stainless steel and low carbon steel with black oxide finish. Broad range of lengths and thread sizes to choose from.

{0} variants (Filters applied) {0} variants (No filters applied)

Set-Up Clamp Kits

In stock Limited availability

The kit is housed in a strong metal holder that can be mounted or can stand on a bench. Kit includes: 6 T-slot nuts, 24 studs, 4 flange nuts, 4 coupling nuts, 12 step blocks, 6 step clamps, 1 T-slot cleaner and 1 metal stand.

{0} variants (Filters applied) {0} variants (No filters applied)

Step Blocks

In stock Limited availability

Triangular Step Blocks have long angled serrated edges that fit together so the top block is the same height as the work piece to level a set-up clamp. Step blocks are sold in pairs but a single step block can be used with a serrated step clamp.

{0} variants (Filters applied) {0} variants (No filters applied)