Pin rings are made from hard drawn wire steel and are zinc-plated. Stainless ones are type 316. Available in different diameters.

Pin vises are tool holding devices that allow small tools to be held in place with positive acting jaws (think mini-chuck) with interchangeability depending on the effective diameters of the tool itself. These pin vises are available in a few varieties, with tapered collets, insulated handles, double ends, and reduced lengths.

Pin Lanyards have a wide variety of uses for attaching pins and small parts. They come in a wide range of lengths, and have a choice of end attachements.

There is a wide variety of fastening pins that range in function, size and diameter. Reid has thousands of pins available to you, from clevis pins, mechanical, quick release, fastener and tapered pins to double acting pins and hydraulic cylinder pins. Reid also offers fastening pin sets that contain an assortment of sizes for your convenience.

Pull pin spring plungers allow you to quickly retract and engage the plunger for locating, fastening and quick change operations. They consist of the housing barrel and plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Featuring ball knob, lobed knob, T-handle and threaded end types.

These pull dowels have a tapped hole which permits easy removal. The style with flat has a ground flat on one side of the pin for easy removal.These pull dowels have a tapped hole which permits easy removal. Heat treated to RC58-62 min. O.D. tolerance is +.0001"/.0003" (M6).These pull dowels have a tapped hole which permits easy removal. One side ground flat for easy removal. Heat treated to RC58-62 min. O.D. tolerance is +.0001"/.0003" (M6).These pull dowels have a tapped hole which permits easy removal. One side ground flat for easy removal. Heat treated to RC58-62 min. O.D. tolerance is +.0001"/.0003" (M6).

Pull Dowel Removers-Setters work in conjunction with puller studs for removing and setting any pull dowel. An upward motion with the slide handle will remove a dowel while a downward motion is used to set the dowel.

C-Washers can be used to distribute the load of a fastener and help prevent damage to the object being fastened.Dished washers are similar to spherical washers, but instead are designed for elongated holes. They are punched, gauged and tempered.Ideal for applications where there is an uneven surface. Offered as pairs or individual male and female pieces.Ball Head Position Adjusters allow exact positioning when assembling sloping bases up to approximately four degrees angle of inclination. A second ball head position adjuster is recommended as a base in sloped positions. They are one-piece constructed.Bonded WashersMetal flat washers are available in mild or stainless steel. They provide full insulation, cushioning and spacing.Designed for applications involving low loads and require high deflection. Available in plain, metal, or zinc plated finishes.Commonly used as a take up spring for a wide range of load bearing applications. Provide greater load bearing capacity than single wave washers with some loss in deflection capability.Snubbing Washers are used with bonded mounts to provide multi-directional vibration isolation, shock attenuation, and noise reduction. When used together, these fail safe mounts and washers are easy to install and provide consistent performance."

Unthreaded Spacers act as a buffer to absorb vibrations and reduce noise. These spacers are ideal for use in electronic appliances and applications where movement in stationary machinery is unavoidable.

Retainer Rings are installed into pre-manufactured grooves on axles to act as a shoulder and retain a specified component or assembly. These retainers are designed with a lip for easy assembly and dismantling.C-Clip Retainer Rings can be used on axles with or without pre-manufactured grooves as an ideal solution to shoulder and retain a specified component or assembly. These C-Clips have a durable and bright zinc finish.E-Clip Retainer Rings slide into a groove on a shaft to shoulder, align, and retain a specific component or assembly. E-Clips are available in a wide range of sizes and variety of materials to best suit your application.

Chucking reamers are used to enlarge an existing hole to an exact size for a precise fit.

Featuring tool plates for cobot end effector extensions. Available in various shapes and thread sizes.

Featuring extension kits and air-blow off nozzle for both tool-extension and machine tending purposes. Fast and simple installation with easy to follow instructions. Includes all tools and hardware necessary to assemble.

Featuring cobot adapters for both tool-extension and tool-array purposes. Fast and simple installation with easy to follow instructions. Includes all tools and hardware necessary to assemble and mount on your cobot.

Flange Mounting Brackets secure pneumatic cylinders to reduce movement and misalignment. The steel or aluminum material is durable and withstands high temperatures.

Height adjustment bolts are used when dealing with the positioning and alignment of motors, motor units, drive components and production lines.

Organized tools are critical to maintaining a clean and efficient workstation. The tool tree for cobot end-effectors enables you to organize your tool plates securely and quickly by sliding your tool plate into one of the tool holders. The user can add up to 8 tool holders or remove as needed.

DESTACO’s TC1 Series tool changers are ultra-light, compact, and ideal for cobot work cells and applications requiring custom coupling solutions. Designed for safety, ease of use, durability, and excellent repeatability, this tool changer features a very low profile and a coupling solution with pneumatic and electrical pass-thru capability. The tool changer features IS0 9409 mounting, plus a highly adaptive blank version that is easily modified by machine builders for application specific needs.

Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conforms to standard bolt and stud sizes.

Stock crowders provide positive alignment of stock in dies and fixtures. Saves pilots anc can be easily removed for die sharpening.

Flexible couplings allow for some misalignment but rotational speed may be slightly compromised. Available as both assemblies and individual components (hubs, sleeves, halves and spiders).

These bearings are self aligning, maintenance free and made of high performance polymer. Dust, dirt, corrosion and chemical resistant. Operates in temperatures ranging from -40 to +275 degrees Farenheit.

Accessorize your actuators with floating joints, sensors, clevises and much more! These parts assist the actuators to meet application needs by enhancing alignment, mounting, sensing and attachment needs.

A shoulder screw, or shoulder bolt, is a specialized fastener characterized by its three distinct sections: a head, a precisely machined unthreaded cylindrical shoulder, and a threaded end. This unique design enables its use in applications requiring precise rotation, alignment, or spacing. The smooth, tightly toleranced shoulder acts as a bearing surface, reducing friction and wear, making it ideal for pivot points, guiding motion, and supporting machinery. Common applications include die stripper plates in metalworking, as well as the assembly of pulleys and gears. In essence, shoulder screws provide accurate alignment and smooth rotation, serving as both pivot points and bearing surfaces in various mechanical assemblies.

A vise stop is a machinist's vise accessory for consistent, repeatable workpiece positioning. It eliminates manual alignment for repetitive tasks, improving speed and accuracy. Different types attach to the vise or table, some magnetically. It boosts efficiency and precision in machining identical parts.