15 Series

The 80/20 15 Series offers standard 1.5 inch T-slot aluminum extrusions. They come in clear or black anodized finishes and are compatible with 15 Series fasteners.

An aluminum framing system angle block is a specific type of external fastener used in T-slot aluminum extrusion systems. It's designed to connect two aluminum profiles at a fixed or adjustable angle, typically used for bracing or support rather than as a primary load-bearing joint.

A lift system is a modular solution built from T-slotted aluminum extrusions and specialized components, enabling precise, controlled vertical height adjustment. Primarily using electric column lifts or, less commonly, hand cranks or custom actuators.

Monitor mounts are specialized components that securely attach monitors to T-slot aluminum structures. They offer VESA compatibility and extensive adjustability (tilt, swivel, rotate, height, extension) for optimal screen positioning. Made from durable steel, these mounts are easy to integrate using T-nuts and bolts. Their modularity allows for custom single or multi-monitor setups.

Within an aluminum framing system , panel mounts are components designed to secure solid infill materials (panels) within T-slot aluminum extrusion frameworks. These panels are chosen based on specific application needs like impact resistance, sound dampening, or chemical resistance. Meanwhile, mesh mounts are fasteners specifically engineered to secure mesh panels within these T-slot systems, facilitating the construction of open guards, safety barriers, or enclosures that require airflow, visibility, and lightweight protection.

Within an aluminum framing system utilizing T-slot aluminum extrusions, panels are solid infill materials (e.g., polycarbonate, HDPE, aluminum composite) used for surfaces, walls, guards, enclosures, and tabletops, selected based on needs like visibility or impact protection. Plates are flat, typically metallic components for joining, bracing, or mounting. For securing mesh, the roll-in mesh panel retainer is a specialized fastener designed to mount recessed mesh panels within the T-slot channel.

An aluminum framing system pivot joint is a specialized fastener used in T-slot aluminum extrusion systems to create a dynamic, adjustable, or hinged connection between profiles. Unlike fixed angle connectors, pivot joints allow one or more profiles to rotate or pivot relative to another, offering a wide range of angular movement, often up to 180 degrees.

An aluminum framing system pivot components (often called pivot joints or structural pivot nubs and pivot arms) allow T-slot aluminum extrusions to connect at variable angles. This is essential for applications like adjustable workstations, ergonomic setups, hinged doors or guards, and complex, non-orthogonal structural designs.

A T-nut block is a specific, often more robust or block-shaped, type of T-nut. Used with T-slot aluminum extrusions. it slides into the channel to provide a secure, internal female thread for attaching components with bolts.

An anchor fastener for T-slot profiles is a strong, internal connector designed to create clean, flush, and vibration-resistant 90-degree joints. It typically involves a screw, cam, and T-nut, and requires a counterbore to be machined into the end of one profile for installation. This allows for a very robust connection that's hidden from view.

Floor mount base plates, flat plates typically made of aluminum or steel, which attach to the bottom of 80/20 extrusions. These plates feature pre-drilled holes or slots, enabling the structure to be bolted or anchored directly to the floor, with some designs offering vertical or lateral adjustment for precise positioning and leveling.

Brackets are essential, externally mounted fasteners for T-slot aluminum extrusion structures. They provide strong, highly versatile 90-degree connections, and sometimes even more complex joints. A major benefit of most 80/20 brackets is that they don't require any machining on the profiles, making them exceptionally quick and easy to install, adjust, and reconfigure. You secure them by simply inserting T-nuts into the T-slots and bolting the bracket into place.

Connectors come in various forms to suit different needs. Central connectors, for instance, are used to join to the center face of another profile. Miter connectors specialize in creating hidden angled joints, often at 45 degrees. Bolt connectors are internal fasteners that primarily use a threaded bolt for secure attachment. Whether you need a hidden central connection, a clean angled joint, or a general internal attachment, these specialized connectors, sometimes aided by milling, enable versatile and aesthetically pleasing structural designs.

T-slot covers are specialized components engineered to fit precisely into the open channels of aluminum extrusion profiles. Beyond providing a clean, finished, and professional look to your aluminum frame, these covers serve a crucial protective function: they act as a barrier, preventing dust, dirt, debris, and other contaminants from collecting inside the T-slot. This is especially important for machinery and in sterile cleanroom environments. For a perfect fit, always be sure to match the T-slot cover to the specific "series" or size of your aluminum extrusion.

Aluminum framing system t-slot dynamic pivots are components designed to allow two aluminum profiles to rotate freely relative to each other, creating a hinge or pivot point within a modular T-slot framework. Unlike "pivot joints" which are typically tightened to fix an angle, dynamic pivots are intended for applications requiring continuous or repeated angular motion.

End fasteners are internal connectors used to create clean, hidden, 90-degree joints where the end of one T-slot profile meets the face of another. They consist of a screw and a specialized wing clip, and their installation requires machining both profiles: an end tap on the "mounting" profile and an access hole on the "mating" profile. These fasteners provide a strong, anti-rotation connection suitable for many applications where aesthetics are important.

Flat joining plates are external fasteners used to connect T-slot aluminum profiles. They are flat metal plates with pre-drilled holes that bolt onto the outside surfaces of profiles using T-nuts. These versatile plates are ideal for creating straight, T-shaped, or corner connections, and a major benefit is they don't require any machining on the profiles, allowing for easy installation, adjustment, and reinforcement of structures.

A handle for an alminum framing system is a component specifically designed to be easily mounted onto T-slot aluminum extrusions, providing a grip for opening, closing, or maneuvering structures, doors, drawers, or adjustable elements.

A hinge within an aluminum framing system, particularly for T-slot aluminum extrusions, is a specialized component creating a pivotal connection between profiles or between an extrusion and a panel. These enable the creation of swinging doors, access panels, guards, or adjustable elements. Common types include Standard Hinges, offering basic 180-degree motion, and Detent Hinges, which hold a door open at specific angles for access or ergonomic positioning. All these hinges typically mount directly into the T-slot channels using standard fasteners like T-nuts and bolts, ensuring a secure and adjustable fit crucial for functional and accessible modular frameworks.

Inside corner connectors for T-slot aluminum extrusions are internal fasteners that create clean, hidden 90-degree joints. Unlike external brackets, these connectors are concealed within the profiles, offering a sleek look without protrusions. Many standard inside corner connectors can be installed quickly without any special preparation, simply by sliding them into the T-slots and tightening set screws. This makes them ideal for building professional-looking frames and enclosures.

Latches and catches are specialized hardware components designed to secure doors, panels, drawers, or other movable elements within a T-slot aluminum extrusion framework. They provide a means to keep these elements closed, either by friction, a mechanical lock, or a magnetic hold.

Brake Kits for aluminum framing systems are mechanisms that can be added to linear bearings to lock them in a specific position along the T-slot. These come in various handle styles (e.g., "L" handle, "T" handle, wing nut).

Linear bearings are commonly used for general linear motion applications. They are available in various configurations (single or double flange, short or long) and include self-lubricating UHMW (Ultra High Molecular Weight Polyethylene) pads, screws, and shims for precise fitting. They are designed for compression loads.

Compatible with VESA MIS-D 75mm and 100mm patterns, it holds monitors weighing 4.40 to 17.64 pounds (2.0 to 8.0 kg). This arm provides significant adjustability, including 360-degree flange rotation and adjustable tilt. Made from steel and aluminum, it's designed for 15 Series, 40 Series, and 45 Series 80/20 extrusions and comes with all necessary mounting hardware. Its applications range from ergonomic workstations and industrial control panels to sim racing rigs and custom desks, offering precise and adaptable monitor positioning.