Aluminum Automation

Accessorize your actuators with floating joints, sensors, clevises and much more! These parts assist the actuators to meet application needs by enhancing alignment, mounting, sensing and attachment needs.

Maintain the cleanliness and protection (from residue) on your shop-floor. Choose from a variety of lengths, styles and materials (stainless steel, rubber and aluminum).

Blank Clamp Arms are designed to allow custom arms to be attached to the piston rod of power swing clamps with tapered rod ends.

These modular elements can be positioned and tightened without removing the swing cylinder from the fixture. Can be mounted with a bolt or through compression method depending on the arm type.

Shaft collars have extremely diverse applications and fall into three main categories, positioners, spacers and limiters. Reid Supply has all the main types from one-piece, two-piece, hinged, set screw aand self-locking shaft collars that will fit most shaft types from round to keyed, threaded or even a support rail.

In-Line Air Regulators are lightweight and control the volume of air reaching the tool. These regulators are designed for fine-tuning tool performance when the supply air pressure is at the correct level.

Flexible couplings allow for some misalignment but rotational speed may be slightly compromised. Available as both assemblies and individual components (hubs, sleeves, halves and spiders).

Control the flow of air around your plant with our vast selection of manifolds that feature various inlet sizes, outlet sizes, number of outlets and shapes.

Flow Control Valves are manual direction control valves suitable for use with all pneumatic systems. These four way valves have a precision lapped rotor and seals that offer high tolerance to dirt contamination and can be used as two or three-way valves by plugging unused ports.

Polycarbonate Moisture Separators filter contaminant water, dirt, and oil out of shop air using a centrifugal spinning action. The polycarbonate bowl includes an automatic float drain to expel built up liquids inside the bowl.

Pneumatic Block Hold Down Clamps provide clamping force from the top, wedging work pieces down against the work surface. Styles include automation power clamps, power rollers, and heavy duty clamps to best suit your application.

Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability.

Power Clamp Mounting Blocks provide recessed mounting capability for power swing clamps. These blocks are made of lightweight red anodized aluminum with variable height adjustment.

Includes support rails and support blocks. The support rails are pre-drilled for easy mounting and are to be used with open style bearings. Support blocks are used for shaft end support.

These come as one and two piece assemblies. The one piece integrated design eliminates assembly time but cannot be used with ball bearings. The two piece assembly comes with pre-drilled holes for easy installation.

Triangular Step Blocks have long angled serrated edges that fit together so the top block is the same height as the work piece to level a set-up clamp. Step blocks are sold in pairs but a single step block can be used with a serrated step clamp.

High quality shafts that come as solid, pre-drilled and square styles. Multiple materials to choose from: Steel, Stainless Steel, Ceramic Coated Aluminum and much more.

Our high-speed vacuum generators are designed for automated lifting applications. Paired with vacuum cups, they are used to lift and move metal, glass, and plastic materials, or any object with a smooth, nonporous surface. Our auto-release vacuum generators offer single-line operation, integrated blow-off, and built-in exhaust silencer.