Machining and Finishing

We found 35 product types for Machining and Finishing

Need a Quote?

For large volumes and non-standard products, add to your cart and click request a quote. You may also call 800 253 0421 or email sales@reidsupply.com. We respond to most quotes within 4 working hours. (Business hours are Monday through Friday, 7:30 am to 6:00 pm ET)

Filter Products

  • of 2
List Grid

Abrasive Belts

In stock Limited availability

Abrasive Belts sands virtually any industrial surface.

{0} variants (Filters applied) {0} variants (No filters applied)

Abrasive Brushes

In stock Limited availability

Abrasive brushes are ideal for cleaning, deburring, and finishing applications. We carry a wide assortment of abrasive brushes, including wire wheel brushes, end and cup brushes, radial bristle brushes, honing and tube brushes, and abrasive hand brushes.

{0} variants (Filters applied) {0} variants (No filters applied)

Abrasive Disks

In stock Limited availability

Abrasive discs are ideal for grinding, deburring, finishing, polishing, and surface preparation. We carry a wide assortment of abrasive discs, including flap discs, holed discs, hook and loop discs, adhesive discs, and quick-change discs. We also stock a selection of accessories, such as pad holders, mandrels, shanks, and adapter nuts.

{0} variants (Filters applied) {0} variants (No filters applied)

Abrasive Hand Pads

In stock Limited availability

Abrasive hand pads are ideal for cleaning, scuffing, deburring and finishing applications. We carry an assortment of abrasive hand pads, as well as pad blocks and holders.

{0} variants (Filters applied) {0} variants (No filters applied)

Abrasive Sheets & Rolls

In stock Limited availability

Our selection of abrasive sheets and rolls are ideal for general purpose and hand sanding needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Adjustable Coolant Hose

In stock Limited availability

Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting tools. Waste from cuts, especially in industrial shops, can build up and get in the way of the machining process. Reid offers industrial quality adjustable hoses and everything to connect them, including valves, reducers, fittings, nozzles, shields and end caps. Vacuum lines can also be added to the workstation to remove chips as well as excess lubricant or coolant from the working surfaces.

{0} variants (Filters applied) {0} variants (No filters applied)

Adjustable Vacuum Hose

In stock Limited availability

Vacuum Ejectors are an uncomplicated alternative to vacuum pumps in lifting operations. These ejectors have a solid resin nozzle and body making them lightweight and compact for close mounting.

{0} variants (Filters applied) {0} variants (No filters applied)

Broaches

In stock Limited availability

Shaped like a saw blade, our keyway broaches and square hole broaches are designed to create holes in unique shapes.

{0} variants (Filters applied) {0} variants (No filters applied)

Chuck Accessories

In stock Limited availability

We offer chuck jaw and nut kits, as well as chuck keys, leashes, and wrenches.

{0} variants (Filters applied) {0} variants (No filters applied)

Chuck Jaws

In stock Limited availability

Chuck Jaws have jaws, (sometimes called dogs) that are arranged in a radially symmetrical pattern like the points of a star. The jaws are tightenedto hold the tool or workpiece. Often the jaws will be tightened or loosened with the help of a chuck key, which is a wrench-like tool made for the purpose.

{0} variants (Filters applied) {0} variants (No filters applied)

Collets

In stock Limited availability

Collets are sleeve bushings that fit into collet chucks or machine spindles and hold small diameter tool workpieces. Firmly grips the tools and workpieces to keep them from wobbling or loosening during machining. Collets are used on cnc, milling machines, lathes, grinders, and other machine tools.

{0} variants (Filters applied) {0} variants (No filters applied)

Combined Drills and Countersinks

In stock Limited availability

Combination drills and countersinks are short, double-ended drills used to produce a shallow conical or center hole, typically on the end of workpiece to be held between centers before turning in a lathe or cylindrical grinding.

{0} variants (Filters applied) {0} variants (No filters applied)

Counterbores

In stock Limited availability

Counterbores, sometimes called spotfacers, create a flat-bottomed cavity at the top of an existing hole so that a bolt, nut, or other part is hidden beneath or sits flush with the top of the hole when installed into it.

{0} variants (Filters applied) {0} variants (No filters applied)

Countersinks

In stock Limited availability

Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down.

{0} variants (Filters applied) {0} variants (No filters applied)

Cutting and Tapping Fluids

In stock Limited availability

Cutting and tapping fluids are used to cool and lubricate tools and workpieces during metalworking processes. They help reduce friction, create cleaner cuts, and prolong tool life. From aluminum to stainless steel, our selection of multi-purpose lubricants can be used on all ferrous and non-ferrous metals, as well as some plastics. Available in fluid, aerosol spray, or stick lubricant, our products help make cutting cycles faster and easier.

{0} variants (Filters applied) {0} variants (No filters applied)

Deburring Tools

In stock Limited availability

Deburring Tools remove burrs and other surface defects from inner and outer straight and hole edges.

{0} variants (Filters applied) {0} variants (No filters applied)

Dies and Accessories

In stock Limited availability

Dies are used to create the male component of an assembly by cutting a thread on the external surface of a metal rod, such as a screw or bolt. Our selection of dies includes round adjustable dies and die stocks.

{0} variants (Filters applied) {0} variants (No filters applied)

Drill Bushings

In stock Limited availability

Drill bushings or drill guide are installed into a drilling jig to guide, support, and position a drill or other cutting tool during metalworking tasks. They keep the cutting tool from wandering or bending as it enters the workpiece.

{0} variants (Filters applied) {0} variants (No filters applied)

Drills

In stock Limited availability

ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to find drill bits for various metal, wood or plastic materials.

{0} variants (Filters applied) {0} variants (No filters applied)

End Mills

In stock Limited availability

Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more.

{0} variants (Filters applied) {0} variants (No filters applied)

Grinding & Cutting Wheels

In stock Limited availability

Reid Supply offers a comprehensive selection of sanding and grinding tools for finishing, shaping, polishing, cleaning, cutting and deburring. We have everything from sandpaper to bristle discs and cross-hole brushes. From machining metal, wood and plastic, Reid has everything you need for threading, broaching, drilling, boring, milling, turning and hole cutting.

{0} variants (Filters applied) {0} variants (No filters applied)

Hole Saws and Accessories

In stock Limited availability

Hole saws are used for making large hold diameters because they can do the job quicker than standard drill bits. We offer an assortment of hole saws, as well as pilot drills and arbors.

{0} variants (Filters applied) {0} variants (No filters applied)

Indexable Drilling

In stock Limited availability

Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of a less expensive but tougher material. Plus, the removable inserts can be easily exchanged during production without affecting the overall geometry of the tool, thereby eliminating additional set-up changes. For drilling applications, we offer both indexable drills and indexable drill inserts.

{0} variants (Filters applied) {0} variants (No filters applied)

Indexable Grooving and Parting

In stock Limited availability

Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of a less expensive but tougher material. Plus, the removable inserts can be easily exchanged during production without affecting the overall geometry of the tool, thereby eliminating additional set-up changes. For grooving and parting applications, we offer grooving holders, grooving blades, integral shank toolholders, and parting inserts.

{0} variants (Filters applied) {0} variants (No filters applied)

Indexable Milling

In stock Limited availability

Indexable cutting tools are a cost-effective and time-saving alternative to their solid tool counterparts. Since the cutting tip is a small insert, a lesser portion of cutting material is needed rather than making a solid tool of the same material. This allows the shank or tool holder to be made of a less expensive but tougher material. Plus, the removable inserts can be easily exchanged during production without affecting the overall geometry of the tool, thereby eliminating additional set-up changes. For milling applications, we offer indexable end mills and milling inserts.

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 2