For large volumes and non-standard products, add to your cart and click request a quote. You may also call 800 253 0421 or email email@example.com. We respond to most quotes within 4 working hours. (Business hours are Monday through Friday, 7:30 am to 6:00 pm ET)
(13 product groups)
The Actima clamping device is self-locking and designed for smooth, precise clamping that is both repeatable and very forceful. It can be used for thrust or tension clamping, and is ideal to build into clamping fixtures, such as a teeter-totter. The clamping plunger of every Actima clamp has a travel of 12 mm.
Reid Supply offers left hand and right hand thrust and pull Actima handles along with a variety of mounting hardware and accessories for toggle clamps of all diameters and latching applications
Bolt Retainers are welded onto solid toggle clamp hold down bars after securing the spindle assembly with jam nuts. These bolt retainers are available for 1/2” – 5/8” spindle diameters.
Polyurethane Cone Head Spindle Caps attach to head of the spindle assembly on toggle clamps. Internal threads allow the caps to be screwed onto the spindle. The polyurethane material has good memory, high oil resistance, and abrasion resistance.
Flanged Washers are used with U-Bar clamps for securely latching applications on molds, doors, lids, access covers, drums, and containers. Flanged washers are available in durable steel or stainless steel.
Flat Tip Bonded Neoprene Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp. The steel spindle is durable while the flat neoprene tip minimizes marking fragile or polished surfaces.
Hex Head Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp. These assemblies have a stainless steel, steel, or nylon bolt that acts as the spindle cap and is supplied with two jam nuts.
Bolt-on Horizontal Latch Plates work with pull action latch clamps to provide a positive gripping power and lock the connection. These clamps are made of durable steel or stainless steel.
Neoprene Rounded Spindle Caps attach to head of the spindle assembly on toggle clamps. Two attachment styles of rounded caps are available including slip-on for hex head spindles and slip on to fit the threaded end of a spindle.
Swivel Foot Spindle Assemblies are ideal for use where a large area needs clamped. Use this alternative spindle assembly when the clamping force needs to be spread over a larger area and surface area than covered by the spindle provided with the toggle clamp.
U-Bar Hook & Arm Assemblies are ideal for latching applications on molds, doors, lids, access covers, drums, and containers. Made of steel or stainless steel, U-Bar assemblies are supplied with two jam nuts.