Combination spanner and specially designed protective caps for ring spanner and open-end spanner.

Kit can be used with any 5⁄16" square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers, and three set screws. The Quarter Turn lock range is supplied with a range of accessories including fixing rings. These are supplied in two different types; one in Spring Steel and the other in Die Cast Zinc. They are suitable for all locks with a 20.2 x 22.2 fixing hole. These are quarter turn latch accessories. Available in 3 styles; 2 are latch hooks and 1 is a latch finger pull. Latch and Lock Keys are specific to their parent part for additional security and will often need to be ordered separately. All of the keys for our locks and latches are available here.

Swing latch bolts are versatile fasteners used in industrial applications for both lifting and linkage purposes. They are primarily employed for:Jigs and fixtures: Facilitating quick and secure connections. Linkages: Connecting components, such as a swing bolt to a cylinder yoke. Permanent mounting: Securing items to industrial machinery or equipment for lifting. Rigging and suspension: Acting as anchor points for rigging hardware in various tasks.

U-Bar Hook & Arm Assemblies are ideal for latching applications on molds, doors, lids, access covers, drums, and containers. Made of steel or stainless steel, U-Bar assemblies are supplied with two jam nuts.

Flanged Washers are used with U-Bar clamps for securely latching applications on molds, doors, lids, access covers, drums, and containers. Flanged washers are available in durable steel or stainless steel.

Plumbing and hosing for pneumatic/hydraulic applications is an integral but complicated task in the manufacturing process. Reid Supply has a broad selection of vibration dampening and noise cancelling hose clamps that will enable you clamp your hoses ergonomically in multiple orientations around your site. Also featuring electrically insulated and corrosion-resistant products.

C-Clamps include a flat surface top that is used as the stationary jaw while a threaded stud is screwed through the top with a rotating pad on one end and a T-handle on the other. Force is applied by holding the clamp over the work piece and turning the T-handle upwards.

Control Knobs with Markings are ideal on applications that require fine, precise position adjustments. These knobs are designed with an ergonomically shaped knurled rim and indicator mark for accurate setting and adjustment.Control Knobs with Arrows are ideal on applications that require fine, precise position adjustments. These knobs are designed with an ergonomically shaped knurled rim and easily legible laser engraved arrow for accurate setting and adjustment.

ID Expansion Clamps are excellent for palletized setups in secondary operations on lathe parts. These clamps are made of mild steel for machinability to size on lathe or mill and allow more parts per work cube or fixture plate.

Clamping levers are used for applications that require greater torque power than a standard lever, we carry a broad selection of heavy-duty steel clamping levers in a variety of configurations, including high profile or low profile, straight arm or offset arm, and single arm or double arm.

Hardened and ground Wedge Clamps can product holding forces over 19,000 lbs. The cross-wedge construction allows the clamp to lock firmly in every direction as it is tightened down. Wedge Clamps are available with single or double wedge.

Edge and Toe Clamps provide positive down force while using very little space on a fixture.

Plain Grip Machine Strap Clamps reach over the work piece and hold it in place for maximum pressure. These clamps are available machined from solid bar stock or tempered steel with a varnished finish.

Spindle Bar Clamps are easy to use by sliding the moveable arm into position and tightening the screw spindle for instant clamping at any opening. The deep throat allows for greater reach and saves time over ordinary C-Clamps.

Manual Swing Clamps are easy-to-use options for fixture building/testing, welding and assembly operations in the industrial, aerospace, and automotive markets. They provide quick swing-and-clamp movement for increased productivity. The new Manual Swing Clamps feature an enclosed cam track that can clamp and toggle-lock in the pull down closed position. They also feature a detent that holds the clamp in the open position in order to prevent unwanted movement.

Sometimes also call a draw latces, this T-handle draw clamp from Reid Supply is a light weight latch made from durable construction and built for heavy duty applications

Manuel Plier Clamps have a pivoting jaw to allow a large depth when clamping awkward profiles. The jaw spindle can be pre-set during repetitious action to achieve the optimum clamping distance and pressure.

Flanged plunger clamper with push/pull action are part of this standard striaght line action toggle clamp

The Actima clamping device is self-locking and designed for smooth, precise clamping that is both repeatable and very forceful. It can be used for thrust or tension clamping, and is ideal to build into clamping fixtures, such as a teeter-totter. The clamping plunger of every Actima clamp has a travel of 12 mm.

Reid Supply offers left hand and right hand thrust and pull Actima handles along with a variety of mounting hardware and accessories for toggle clamps of all diameters and latching applications

Through Hole Mount Plunger Clamps are designed for quick action when working with wide size variations or where opening and closing motions need to be long. The locking handle is rotated to advance the plunger and lock it with the collet action.

Base mounted plunger clamps Plunger have an extremely low height when in operation regardless of thehandle positionmaking these toggle clamps extremelt versatile when the working space is restricted.

Squeeze Action Bar Clamps are ideal for clamping in front, behind, or at the side of the rail. The convenient one-handed operation includes the handle with pump lever parallel to the rail to easily change from clamping to spreading by twisting the dial with no disassembly.

Knife Cam Edge Clamps can be used for clamping rough cut stock, castings and any material that requires a hardened clamping element.

Pneumatic Block Swing Clamps are durable for ideal use in high product applications. Loading and unloading is made easier by the clamp arm's ability to swing or lift out of the way. These clamps can be mounted horizontally or vertically.

provide quick swing-and-clamp movement for increased productivity via a pneumatic cylinder.