Automation

These jaw locating sleeves can be used with our line of pneumatic parallel grippers to ensure precise finger mounting.

For use with our line of pneumatic parallel grippers, these quick installation kits make setting up fast and easy. One kit is required per gripper and includes two sensors, two air fittings, four jaw locating finger sleeves, and four finger mounting screws.

Our PNP inductive sensors with quick disconnect are designed for use with our line of pneumatic parallel grippers.

These fail-safe valves are designed to control air flow and can be used with our line of pneumatic parallel grippers.

Pneumatic parallel grippers operate with compressed air and are designed for automated pick-and-place applications. Available in 20 sizes with stroke options from 5mm to 50mm and fast actuations from 60ms. These grippers offer easy installation, low maintenance, and finger compatibility with competing units for quick upgrades and cost savings.

Pneumatic Block Hold Down Clamps provide clamping force from the top, wedging work pieces down against the work surface. Styles include automation power clamps, power rollers, and heavy duty clamps to best suit your application.

Pneumatic Block Swing Clamps are durable for ideal use in high product applications. Loading and unloading is made easier by the clamp arm's ability to swing or lift out of the way. These clamps can be mounted horizontally or vertically.

Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability.

Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability.

provide quick swing-and-clamp movement for increased productivity via a pneumatic cylinder.

Pneumatic Push Pull Clamps are used to apply pressure vertically in a straight-line action. Use clamps to wedge your project up against a rail or pair with another push pull clamp to apply force against each other in a vise-like application.

Available in both single and dual axis options. These stages are versatile, accurate, smooth and ideal for intermittent motion applications.

Power Clamp Mounting Blocks provide recessed mounting capability for power swing clamps. These blocks are made of lightweight red anodized aluminum with variable height adjustment.

Power Clamp Toggle Lock Clamp Switches send signals from the power clamp to a programmable controller or electronic device. The switch is activated by a magnetic ring that closes the contact and sends a signal as it moves under the switch.

Rectabngular Electromagnets use a controlled electrical current to control the strength of the magnetic field. These plug-in electromagnets have controlled holding power and on command release.

Featuring one-piece clamp, two-piece clamp and set screw styles. Keyed and keyless bores available. Clamp screws are forged and treated with an anti-vibration coating to keep them from loosening.

Roller bearings can offer higher load capacities than ball bearings by virtue of their line contact versus point contact (used in ball bearings). These bearings can be utilized for general use and within engine connecting rods.

These products are compact that can support and guide heavy loads with high accuracy, excellent repeatability and low friction.

Reid Suppply provides high-quality roller systems for heavy duty applications. Made with hardened steel these rollers ensure maximum durability.

Rotor magnets are an essential part on the electromagnetic and electromechanical applications that drive much of the industrial manufacturing. These magnets are made of Alinico and are offered in 4 and 6 poles.

Neoprene Rounded Spindle Caps attach to head of the spindle assembly on toggle clamps. Two attachment styles of rounded caps are available including slip-on for hex head spindles and slip on to fit the threaded end of a spindle.

The kit is housed in a strong metal holder that can be mounted or can stand on a bench. Kit includes: 6 T-slot nuts, 24 studs, 4 flange nuts, 4 coupling nuts, 12 step blocks, 6 step clamps, 1 T-slot cleaner and 1 metal stand.

Includes support rails and support blocks. The support rails are pre-drilled for easy mounting and are to be used with open style bearings. Support blocks are used for shaft end support.

These come as one and two piece assemblies. The one piece integrated design eliminates assembly time but cannot be used with ball bearings. The two piece assembly comes with pre-drilled holes for easy installation.

Mount your shock absorbers with convenience with our offering of mounting blocks, stop collars and locknuts. Multiple thread sizes to choose from!