Wire rope clamps, also called cable clamps or U-bolt clips, are used to fix the loose end of a wire rope after it has been looped to form an eye. These clamps consist of a U-shaped bolt and a saddle with two nuts. Two layers of wire rope are placed inside the U-bolt and two or three clamps are required to properly secure the looped end to the rope.

Cam Handle Edge Clamps lock positively at any position within its 180 degree turn to hold parts that vary slightly in dimensions. The clamp jaw pivots forward and downward simultaneously when the handle is turned to hold the work piece securely to the table.

Pneumatic Push Pull Clamps are used to apply pressure vertically in a straight-line action. Use clamps to wedge your project up against a rail or pair with another push pull clamp to apply force against each other in a vise-like application.

Manual Vertical Hold Down Clamps save valuable space without sacrificing holding capacity or clamp performance. A cushioned vinyl handle grip provides improved user comfort and all body and linkage components are zinc plated to resist corrosion.

Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability.

Horizontal Manual Hold Down Clamps have a low height design, cushioned handle grip, and zinc plated components to resist corrosion. The handle and hold down bar move in opposite directions to provide secure holding capacity.

Pneumatic Block Hold Down Clamps provide clamping force from the top, wedging work pieces down against the work surface. Styles include automation power clamps, power rollers, and heavy duty clamps to best suit your application.

Manual Push Pull Clamps have a single hole threaded mount to permit rotation in any direction. This design allows complete flexibility in the fixture in a compact design while securely holding materials in place during production.

Manual Through Hole Push Pull Clamps have a single hole threaded mount to permit rotation in any direction. This design allows complete flexibility in the fixture in a compact design while securely holding materials in place during production.

Flat Head Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp.

Flanged Washers are used with U-Bar clamps for securely latching applications on molds, doors, lids, access covers, drums, and containers. Flanged washers are available in durable steel or stainless steel.

Polyurethane Cone Head Spindle Caps attach to head of the spindle assembly on toggle clamps. Internal threads allow the caps to be screwed onto the spindle. The polyurethane material has good memory, high oil resistance, and abrasion resistance.

Swivel Foot Spindle Assemblies are ideal for use where a large area needs clamped. Use this alternative spindle assembly when the clamping force needs to be spread over a larger area and surface area than covered by the spindle provided with the toggle clamp.

Flat Tip Bonded Neoprene Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp. The steel spindle is durable while the flat neoprene tip minimizes marking fragile or polished surfaces.

Bolt Retainers are welded onto solid toggle clamp hold down bars after securing the spindle assembly with jam nuts. These bolt retainers are available for 1/2” – 5/8” spindle diameters.

Hex Head Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp. These assemblies have a stainless steel, steel, or nylon bolt that acts as the spindle cap and is supplied with two jam nuts.

Cone-Tip (Head?) Bonded Neoprene Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp. The steel spindle is durable while the neoprene cone-tip minimizes marking with minimal clamping contact.

U-Bar Hook & Arm Assemblies are ideal for latching applications on molds, doors, lids, access covers, drums, and containers. Made of steel or stainless steel, U-Bar assemblies are supplied with two jam nuts.

Plunger Spindle? Assemblies for Straight-Line Clamps automatically compensate for variations in part thicknesses. These assemblies are designed to be mounted to plunger clamps.

Neoprene Rounded Spindle Caps attach to head of the spindle assembly on toggle clamps. Two attachment styles of rounded caps are available including slip-on for hex head spindles and slip on to fit the threaded end of a spindle.

Knurled head screws are fasteners designed with a textured surface on the head, providing improved grip. These screws are ideal for applications where a tool-free adjustment is necessary. Material: Steel Series Code:

Flange nuts have a wide flange at one end that acts as an integrated washer. They assist in distributing the pressure across the nut over the part being secured. This reduces the chance of damaging the part and making it less likely to loosen as a result. Material: Steel Series Code:

Designed in unique shapes for maximum comfort and secure grip, clamping knobs provide good leverage and secure fastening for applications that require quick and frequent adjustment.

Protect your set-up clamps with these supports. Includes washer, spring and shaft collar. Black oxide finish on washer. Choose from various diameters.

The kit is housed in a strong metal holder that can be mounted or can stand on a bench. Kit includes: 6 T-slot nuts, 24 studs, 4 flange nuts, 4 coupling nuts, 12 step blocks, 6 step clamps, 1 T-slot cleaner and 1 metal stand.