DESTACO

Accessorize your actuators with floating joints, sensors, clevises and much more! These parts assist the actuators to meet application needs by enhancing alignment, mounting, sensing and attachment needs.

Air-Powered Hydraulic Boosters convert normal shop line air pressure to high pressure hydraulic power. These corrosion and wear-resistant boosters have a built in manifold and self centering air piston for long life.

Base mounted plunger clamps Plunger have an extremely low height when in operation regardless of thehandle positionmaking these toggle clamps extremelt versatile when the working space is restricted.

Blank Clamp Arms are designed to allow custom arms to be attached to the piston rod of power swing clamps with tapered rod ends.

Bolt Retainers are welded onto solid toggle clamp hold down bars after securing the spindle assembly with jam nuts. These bolt retainers are available for 1/2” – 5/8” spindle diameters.

These modular elements can be positioned and tightened without removing the swing cylinder from the fixture. Can be mounted with a bolt or through compression method depending on the arm type.

Featuring cobot adapters for both tool-extension and tool-array purposes. Fast and simple installation with easy to follow instructions. Includes all tools and hardware necessary to assemble and mount on your cobot.

Cobot base connectors allow precise portability between multiple workstations for increased flexibility and productivity. A single cobot base plate can be coupled to an endless number of workstation mounting bases for multi-purpose robot applications. Solutions for standard cobot mounting and user-machined mounting configurations are supported.

Featuring tool plates for cobot end effector extensions. Available in various shapes and thread sizes.

Organized tools are critical to maintaining a clean and efficient workstation. The tool tree for cobot end-effectors enables you to organize your tool plates securely and quickly by sliding your tool plate into one of the tool holders. The user can add up to 8 tool holders or remove as needed.

Featuring extension kits and air-blow off nozzle for both tool-extension and machine tending purposes. Fast and simple installation with easy to follow instructions. Includes all tools and hardware necessary to assemble.

Cone-Tip (Head?) Bonded Neoprene Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp. The steel spindle is durable while the neoprene cone-tip minimizes marking with minimal clamping contact.

Polyurethane Cone Head Spindle Caps attach to head of the spindle assembly on toggle clamps. Internal threads allow the caps to be screwed onto the spindle. The polyurethane material has good memory, high oil resistance, and abrasion resistance.

Flanged plunger clamper with push/pull action are part of this standard striaght line action toggle clamp

Flanged Washers are used with U-Bar clamps for securely latching applications on molds, doors, lids, access covers, drums, and containers. Flanged washers are available in durable steel or stainless steel.

Flat Head Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp.

Flat Tip Bonded Neoprene Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp. The steel spindle is durable while the flat neoprene tip minimizes marking fragile or polished surfaces.

Easy custom mounting for left and right-handed operation. Comes in 2 different colors.

Hex Head Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp. These assemblies have a stainless steel, steel, or nylon bolt that acts as the spindle cap and is supplied with two jam nuts.

External hold open device ensures safe opening operation. Comes in 3 different sizes

General Purpose Single Acting Hydraulic Cylinders produce a linear force using pressurized hydraulic fluid to transfer power from fluid pressure to the piston and into the rod. These cylinders have a maximum operating pressure of 10,000 psi and included coupler.

Hydraulic Cylindrical Swing Clamps have 90 degree left or right handed rotation. The metal treated bodies with upper flanges stand up to wear and corrosion while the piston rod is hardened for added strength.

J-Hook assemblies are ideal for latching applications on molds, doors, lids, access covers, drums, and containers. Made of steel or stainless steel.

Bolt-on Horizontal Latch Plates work with pull action latch clamps to provide a positive gripping power and lock the connection. These clamps are made of durable steel or stainless steel.

Concave push-pull knobs feature tapered shanks and an enlarged head to provide good finger clearance and an excellent grasp for pulling or lifting across a variety of specific shapes.

The concave top is more comfortable in applications that use a thumb push operation. The convex top has a smooth shape and fits comfortably into the operator’s palm for an easy grip.

We carry a large supply of push-pull knobs by manufacturers like Kipp for use in all types of industrial and manufacturing applications in both inch and metric dimensions.

Shop our entire catalog of push-pull knobs online or learn more about which type of knob is right for you by reading our article on Selecting the Right Knobs and Handles.