Steel Hoisting & Rigging Accessories

Rigging hooks are attached to chains, ropes, and slings to lift and move large loads.

A shackle is a U-shaped piece of metal secured with a clevis pin or bolt across the opening. They are used to make connections to slings, rope, cable, etc. Shackles are the primary connecting link in all manner of rigging systems as they allow different rigging subsets to be connected or disconnected quickly.

Winch bars are used with cargo winches which are securing devices fastened to the base of a flatbed truck or trailer. Acting as a hand lever, they adjust the tension of winches and winch straps to stabilize loads and prevent damage from shifting while in transit. These winch bars can be used with portable bolt-on winches and permanent weld-on winches.

Cargo winches are securing devices fastened to the base of a flatbed truck or trailer. Used with winch straps, they stabilize loads and prevent damage from shifting while in transit. The winch is used to pull the strap tight until there is enough tension to secure the load. We offer portable bolt-on winches and permanent weld-on winches.

D-ring tie downs are used on flatbed truck and trailers to help stabilize loads and prevent damage to cargo from shifting while in transit.

Wire rope clamps, also called cable clamps or U-bolt clips, are used to fix the loose end of a wire rope after it has been looped to form an eye. These clamps consist of a U-shaped bolt and a saddle with two nuts. Two layers of wire rope are placed inside the U-bolt and two or three clamps are required to properly secure the looped end to the rope.