Menu Search
Need a Quote?

For large volumes and non-standard products, add to your cart and click request a quote. You may also call 800 253 0421 or email sales@reidsupply.com. We respond to most quotes within 4 working hours. (Business hours are Monday through Friday, 7:30 am to 6:00 pm ET)

Steel

 (237 product groups)

List Grid

Blade Rulers

In stock Backordered. Click here to request lead time.

Blade rulers provide accurate measurements and can function as a useful straight edge for many applications. Available in steel and stainless steel, inch and metric, horizontal and vertical. Some types feature a permanent self-adhesive strip.

{0} variants (Filters applied) {0} variants (No filters applied)

Angle Plates & Irons

In stock Backordered. Click here to request lead time.

Angle plates and angle irons are used to support workpieces in vertical positions for layout, tooling, and machining applications to prevent movement and distortion.

{0} variants (Filters applied) {0} variants (No filters applied)

Bearing Accessories

In stock Backordered. Click here to request lead time.

Bearings often need to be serviced or replaced in the field. Reid Supply acknowledges that and offers inner rings, retaining rings, seals and lubricants as a result.

{0} variants (Filters applied) {0} variants (No filters applied)

Allen Nuts

In stock Backordered. Click here to request lead time.

Allen nuts are designed for applications using socket products. They are internally threaded.

{0} variants (Filters applied) {0} variants (No filters applied)

Adjustable Clamp Rests

In stock Backordered. Click here to request lead time.

Available in stainless steel and low carbon steel with black oxide finish. Broad range of lengths and thread sizes to choose from.

{0} variants (Filters applied) {0} variants (No filters applied)

Ball Transfers

In stock Backordered. Click here to request lead time.

{0} variants (Filters applied) {0} variants (No filters applied)

Abrasive Brushes

In stock Backordered. Click here to request lead time.

Abrasive brushes are ideal for cleaning, deburring, and finishing applications. We carry a wide assortment of abrasive brushes, including wire wheel brushes, end and cup brushes, radial bristle brushes, honing and tube brushes, and abrasive hand brushes.

{0} variants (Filters applied) {0} variants (No filters applied)

Accessories

In stock Backordered. Click here to request lead time.

Accessorize your actuators with floating joints, sensors, clevises and much more! These parts assist the actuators to meet application needs by enhancing alignment, mounting, sensing and attachment needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Ball Bearing Slide Assemblies

In stock Backordered. Click here to request lead time.

Explore our breadth of modular assemblies with multiple size and travel options. These products effectively minimize problems related to impact and shock, over the lifetime of the bearing.

{0} variants (Filters applied) {0} variants (No filters applied)

Abrasive Disks

In stock Backordered. Click here to request lead time.

Abrasive discs are ideal for grinding, deburring, finishing, polishing, and surface preparation. We carry a wide assortment of abrasive discs, including flap discs, holed discs, hook and loop discs, adhesive discs, and quick-change discs. We also stock a selection of accessories, such as pad holders, mandrels, shanks, and adapter nuts.

{0} variants (Filters applied) {0} variants (No filters applied)

Arbor Shims

In stock Backordered. Click here to request lead time.

These shims are used for fast and accurate spacing of milling cutters, gang cutters, saws, slitting blades and grinding tools. ID tolerance -.000/+.011", OD tolerance +/-.002.

{0} variants (Filters applied) {0} variants (No filters applied)

Ball Bearing Bushings

In stock Backordered. Click here to request lead time.

A great liason between the shaft and the carriage, these bushings can handle a moderate amount of load while moving at a fast rate.

{0} variants (Filters applied) {0} variants (No filters applied)

Arbor Spacers

In stock Backordered. Click here to request lead time.

These spacers are used for fast and accurate spacing of milling cutters, gang cutters, saws, slitting blades and grinding tools. ID tolerance -.000/+.011", OD tolerance +/-.002.

{0} variants (Filters applied) {0} variants (No filters applied)

Ball Bearing Carriages

In stock Backordered. Click here to request lead time.

Ball bearing carriages allow for minor misalignements and offer a wide range of linear movements. The integrated rolling elements greatly reduce friction.

{0} variants (Filters applied) {0} variants (No filters applied)

Ball Bearing Guide Rails

In stock Backordered. Click here to request lead time.

Ball bearing guide rails are easy to assemble and give a long service life even with heavy loads or over long distances.

{0} variants (Filters applied) {0} variants (No filters applied)

Actima Clamps & Accessories

In stock Backordered. Click here to request lead time.

The Actima clamping device is self-locking and designed for smooth, precise clamping that is both repeatable and very forceful. It can be used for thrust or tension clamping, and is ideal to build into clamping fixtures, such as a teeter-totter. The version with transverse axis features a pin crossing the central bore of the thrust plunger. The pin can be used as a connecting point for a tension clamping linkage, or it can be used to support a small diameter shaft for thrust clamping. The through hole version features a central bore that is completely open and unobstructed. This is the simplest version, often chosen for thrust clamping. The clamping plunger of every Actima clamp as a travel of 12 mm. For 10 mm of that travel, movement is quick and free. During the final 2 mm of travel, movement is dramatically slower and the clamp becomes self-locking. The location of 2 mm self-locking phase determines whether the Actima is ideal for thrust or tension clamping. In the thrust clamping version, the plunger rises quickly out of the clamp body and slows at the end of its travel. The 2 mm of slow, self-locking travel is highlighted in red in the drawing. The pull version is designed for tension clamping. The plunger starts fully extended, and falls rapidly into the body of the clamp. The 2 mm zone of slow, self-locking travel occurs close to the body of the clamp, just before it is fully retracted.

{0} variants (Filters applied) {0} variants (No filters applied)

Ball & Acme Flanges

In stock Backordered. Click here to request lead time.

Mount the screws, nuts and carriages to these flanges to create a turnkey solution for your linear motion applications. Available in different diameters and thread sizes.

{0} variants (Filters applied) {0} variants (No filters applied)

Ball & Acme Screws

In stock Backordered. Click here to request lead time.

Ball screw products improve load capacity, speed, accuracy and overall life while acmw products improve noise cancellation, vertical applications and backlash.

{0} variants (Filters applied) {0} variants (No filters applied)

Ball & Acme Nuts

In stock Backordered. Click here to request lead time.

Reid Supply offers ball and acme nuts for the reliable transfer of loads in a linear fashion. Available in square, round and flanged options.

{0} variants (Filters applied) {0} variants (No filters applied)

Anti Vibration Mounts

In stock Backordered. Click here to request lead time.

Heavy Duty Industrial Anti-Vibration Machine Mounts are designed with high strength construction for reduction of shock and 80% vibration reduction. The large support plate provides precision leveling and prevents walking or slipping out of position.Low Frequency Anti-Vibration Mounts are specifically designed to provide low frequency vibration isolation, leveling, and shock attenuation for electronics and machinery. The 15 degree swivel off center adjusts to uneven surfaces with neoprene permanently bonded to the steel base.Ring Mounts protect sensitive equipment from disturbing frequencies as low as 600 and up to 1,800 RPM. These low frequency mounts are made of natural rubber with zinc plated fasteners. They will guard against unwanted transmissions of shock and vibrations. Applications include: medical apparatus, measuring devices, valves, small pumps, small motors, compressors, instrument panels business machines, cameras and fans.Neoprene Compression Mounts protect against shock, vibration, and noise in horizontal or vertical compression load applications. These neoprene rubber mounts have metal inserts and plates that are best suited for use in compressors, motors, fans, and generators.

{0} variants (Filters applied) {0} variants (No filters applied)

Base Mount Plunger Clamps

In stock Backordered. Click here to request lead time.

Base mounted plunger clamps Plunger have an extremely low height when in operation regardless of thehandle positionmaking these toggle clamps extremelt versatile when the working space is restricted.

{0} variants (Filters applied) {0} variants (No filters applied)

Ball Knobs

In stock Backordered. Click here to request lead time.

Ball knobs are commonly found on machine tools, jigs, fixtures, and control levers, our ball knobs come in a variety of shapes such as round, knurled, mushroom, and recessed-top.

{0} variants (Filters applied) {0} variants (No filters applied)

Alignment Pins

In stock Backordered. Click here to request lead time.

Alignment pins also know as aligning pins are removable locating devices used to precisely align mating workpieces in jigs and fixtures to workholders and workholding devices. Pieces are aligned by installing a pin in one part and a liner in the other.

Types of standard alignment pin handle styles include: T pins, L pins, convertible handle, and no handle.

Locking alignment pins are useful when the workholder is upside down.

{0} variants (Filters applied) {0} variants (No filters applied)

Adjustable Chains

In stock Backordered. Click here to request lead time.

Easily adjustable for a variety of uses, these durable chain slings feature tamper-proof assemblies and high-visibility yellow fittings. Chain cannot be removed from the master control plate to assure the capacity rating will not be exceeded. Alloy steel construction ensures strength, reliability, and long life. Meets all OSHA, ASTM, and NACM standards.

{0} variants (Filters applied) {0} variants (No filters applied)

Ball Bearings

In stock Backordered. Click here to request lead time.

Ball bearings are capable of rotational speeds that exceed the limits of a plain bearing. Available in sealed, shielded, metal, non-metal and open versions.

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 10