Reid Select Inch

3-arm prong knobs are among the most common type of lobed knob, allowing easy access even with thick gloves on for small adjustments to equipment and workpieces across industries.

Find inch and metric 3-lobed knobs at Reid Supply in both female and male thread inserts of a variety of materials, including plastic, stainless steel, and brass insert threading in Reid Supply’s online catalog.

Lobed knobs, also called clamping knobs, have a scalloped edge with four grip points to allow for maximum grip and comfort, even while wearing gloves.

These durable lobed knobs are impact- and chemical-resistant and provide a neat appearance for finished applications that require precision adjustments.

Reid Supply has a wide range of 4-lobed knobs, from plastic knobs to stainless steel and iron in a variety of thread sizes and mounting types.

Learn more about what solutions exist for your application in our article on selecting the right knobs and handles.

6-lobed prong knobs provide a symmetrical grip across a variety of materials for customizing clamping and manual adjustment of workpieces or equipment.

Our 6-arm prong knobs come in steel, aluminum, plastic, and with a variety of insert threading materials, from brass to steel.

Find the inch or metric size you need for your lobed knob needs online today.

Learn more about the differences between types of lobed knobs by visiting our knowledge center and reading how to Select the Right Knobs and Handles.

Accessorize your actuators with floating joints, sensors, clevises and much more! These parts assist the actuators to meet application needs by enhancing alignment, mounting, sensing and attachment needs.

Available in stainless steel and low carbon steel with black oxide finish. Broad range of lengths and thread sizes to choose from.

Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting tools. Waste from cuts, especially in industrial shops, can build up and get in the way of the machining process. Reid offers industrial quality adjustable hoses and everything to connect them, including valves, reducers, fittings, nozzles, shields and end caps. Vacuum lines can also be added to the workstation to remove chips as well as excess lubricant or coolant from the working surfaces.

Ball knobs can be used to simply grip an appliance or provide ergonomic clamping pressure in a variety of ways. Ball knobs are commonly found on machine tools, jigs, fixtures, and control levers, or used as replacement parts to have on hand.

Our ball knobs come in a variety of shapes and materials from leading suppliers of industrial knobs, including DimcoGray, Elesa, and Kipp.

Shop for ball knobs online or in our digital catalog to ensure you get the exact part you’re after.

These button hole nuts allow for quick removal and threading on long thread lengths. Great for quick change overs. Made from carbon steel. Black oxide finish.

Captive screws, featuring a reduced shank, are crucial in manufacturing for preventing lost fasteners and accelerating assembly. This design improves efficiency by reducing downtime and speeding up maintenance, lowers costs through reduced replacements, and ensures reliability in high-vibration environments. Consequently, they are essential in applications like automated assembly, machinery maintenance, and industrial enclosures, ultimately boosting manufacturing efficiency, safety, and cost-effectiveness.

Designed in unique shapes for maximum comfort and secure grip, clamping knobs provide good leverage and secure fastening for applications that require quick and frequent adjustment.

Clamp rest pads can be used as hardened work rests or as wear plates on your jigs and fixtures.

Control Knobs with Markings are ideal on applications that require fine, precise position adjustments. These knobs are designed with an ergonomically shaped knurled rim and indicator mark for accurate setting and adjustment.Control Knobs with Arrows are ideal on applications that require fine, precise position adjustments. These knobs are designed with an ergonomically shaped knurled rim and easily legible laser engraved arrow for accurate setting and adjustment.

Clamping levers are used for applications that require greater torque power than a standard lever, we carry a broad selection of heavy-duty steel clamping levers in a variety of configurations, including high profile or low profile, straight arm or offset arm, and single arm or double arm.

Plumbing and hosing for pneumatic/hydraulic applications is an integral but complicated task in the manufacturing process. Reid Supply has a broad selection of vibration dampening and noise cancelling hose clamps that will enable you clamp your hoses ergonomically in multiple orientations around your site. Also featuring electrically insulated and corrosion-resistant products.

Neoprene Compression Mounts protect against shock, vibration, and noise in horizontal or vertical compression load applications. These neoprene rubber mounts have metal inserts and plates that are best suited for use in compressors, motors, fans, and generators.

Industrial control knobs come with precise indicator markings and are ideal for applications that require fine, precise position adjustments with manual operation.

These knobs are designed with an ergonomically shaped knurled rim and indicator mark for accurate setting and adjustment.

We carry standard 1/2 inch control knobs in various shapes and pointer styles for your ideal use case.

Learn more about the many types of industrial knobs available through Reid Supply by reading our free Knob Guide.

Glass Fiber Control Levers act as a positional switch on machines, allowing the operator to easily alternate from one setting to another. These levers are easily gripped and resistant to oil and grease.

Cup & Hook Magnets are low profile magnets that are ideal for holding steel doors, hanging signs and lights, mounting antennas, retrieving steel items from tanks, vats, bins and lakes, holding traps in place and many other industrial uses.

Free Standing Cup Mounts provide excellent protection against shock, vibration, and noise in compression and shear applications in harsh environments. The domed shape guards against oil contamination with a low profile, compact design.2 Hole Flange Cup Mounts provide excellent protection against severe impact shock, vibration, and noise. The rugged interlocking metal and neoprene construction is fail-safe and the domed shape of the top metal plate protects against oil contamination.4 Hole Flange Cup Mounts provide excellent protection against severe impact shock with efficient vibration isolation characteristics at frequencies above 40Hz. These cup mounts can be mounted in any orientation for protection of sensitive equipment.

Eye bolts consist of a threaded shank with a loop at one end. When attached to structures such as wood or steel posts, rope or cable is fed through the loop to lift objects. Made of forged carbon steel or stainless steel, our selection of eye bolts includes plain style and shoulder style to resist bending. Available with a hex nut for additional support.

Eye nuts are threaded fasteners with a looped head that can be affixed to a stud or bolt. Made of forged carbon steel or stainless steel, these lifting eyes are used with rope or cable for vertical lifting applications. They may also be used with tie downs and guiding wires.

Fixture keys are used to locate jigs and fixtures on slotted machine tool tables and position the part to be machined in one operation. Our selection of fixture keys includes block keys and sine keys.

Fully threaded studs and rods are ideal for applications where a screw head is not needed or space is precious. Fastening completely into material, they can be threaded right down into the application.

Mount your gas springs with ease with our ball and eyelet type end fittings and mounting brackets. Various materials to choose from!

Ball Gear Lever handles and shafts are made of steel and are ground and polished with a black oxide finish. The T-handle knob is black plastic with a brass insert making these durable levers ideal on machinery applications for changing gears through a pivot point.Oval Knob Gear Lever handles and shafts are made of steel and are ground and polished with a black oxide finish. The oval knob is black plastic with a brass insert for an comfortable grip and aesthetically pleasing finish on machinery applications for changing or shifting gears.Tapered Knob Gear Lever handles and shafts are made of steel and are ground and polished with a black oxide finish. The tapered knob is black plastic with a brass insert for an easy grip and aesthetically pleasing finish on machinery applications for changing or shifting gears.